[Video And Audio] > [Privacy Mask] Setting Privacy Mask; Registering Privacy Masks - Canon VB-730F Mk II Operation Manual

[Video and Audio] > [Privacy Mask]
Setting Privacy Mask
Mask any areas of the camera video. You can check the camera video and set up to eight privacy masks.
When the camera is panned, tilted, or zoomed, the privacy mask areas follow the camera video.
Important
• Privacy masks are applied to all video transmitted from the camera (live video, uploaded video, recorded video and video recorded to
a memory card).
• Privacy masks are not available in the following situations.
– When the camera is launched immediately after being turned on.
– While a panorama image is being created.
• Intelligent Function detection also works in the privacy mask areas. The [Intelligence Function] Setting Page displays the profile line of
detected objects, etc., so you may be able to tell the movement of subjects even if a mask is applied.

Registering Privacy Masks

Use the mouse to position and size the privacy mask areas, then save the settings to the camera.
Display the area which you want to add as a mask area on the video display area.
1
Use the sliders or a preset in the preset selection menu to operate the camera angle.
You can perform the following operations while the
– Centering the camera angle to the position you click in the video display area
– Area zoom operations (P. 58)
HM4x S30
Note
The preview frame is not shown on the video display area while the mouse operation switch button is purple.
HM4x S30 S31
S31
The following settings can be configured here.
• Privacy Mask
• Mask area
• All privacy masks
HM4x S30
mouse operation switch button is purple after clicking it.
HM4x S30 S31
S31
5
131