Blomberg LWF294411W User Manual page 18

4.3.8 End Time
With the End Time function, the startup
of the programme may be delayed up to
24 hours. After pressing End Time button,
the programme's estimated ending time is
displayed. If the End Time is adjusted, End
Time indicator is illuminated.
In order for the End Time function to be
activated and the programme to be completed
at the end of the specified time, you must press
Start / Pause button after adjusting the time.
If you want to cancel End Time function, press
On / Off button to turn off and on the machine.
C
INFORMATION
• Do not use liquid detergents when
you activate End Time function! There
is the risk of staining of the clothes.
1 Open the loading door, place the laundry
and put detergent, etc.
2 Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions.
3 Set the end time of your choice by pressing
the End Time button. End Time indicator
illuminates.
4 Press Start / Pause button. Time
countdown starts. ":" sign in the middle of
the end time on the display starts flashing.
C
INFORMATION
• Additional laundry may be loaded during the
End Time countdown period. At the end of
the countdown, End Time indicator turns
off, washing cycle starts and the time of the
selected programme appears on the display.
• When the End Time selection is
completed, the time appears on the
screen consists of end time plus the
duration of the selected programme.
18 / EN
4.3.9 Starting the programme
1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing the
startup of the programme will turn on.
C
INFORMATION
• If no programme is started or no key
is pressed within 1-10 minute during
programme selection process, the
machine will switch to OFF mode.
Display and all indicators are turned off.
• Selected programme data will be
displayed if you press On / Off button.
4.3.10 Loading door lock
There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
"Door Locked" LED in the panel turns on when
the loading door is locked.
4.3.11 Changing the selections
after the programme has started
After the programme has started you can
make the following changes.
4.3.11.1 Switching the
machine to pause mode:
Press the Start/Pause button to switch the
machine to pause mode while a programme
is running. The light indicating the Start/Pause
status and programme step starts flashing
on the Programme Follow-up indicator to
show that the machine has been switched
to the pause mode. Also, Loading Door light
will also flash until the door is ready to be
opened. When the loading door is ready to be
opened loading door light will will turn off and
programme step indicator and Start / Stop
LED continue to flash.
Also, when the loading door is ready to be
opened, Loading Door light will also turn off in
addition to the programme step light.
Washing Machine / User's Manual