Fujitsu PRIMEHPC FX1000 Operating Manual page 91

Supercomputer
Hide thumbs Also See for PRIMEHPC FX1000:
Table of Contents

Advertisement

Appendix B CPU-MEM-RAS Driver Messages
[ERR.] xos RAS 0005 - internal information ioremap failed for GICv3_GICD.
Meaning
Memory mapping to the GICv3 Distributor (GICD) area failed.
Action
Collect investigation data according to
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0006 - internal information ioremap failed for GICv3_ITS_CNTL_REG.
Meaning
Memory mapping to the GICv3 Distributor (ITS) area failed.
Action
Collect investigation data according to
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0007 - internal information register_ras_handler failed, since the handler has
already been registered.
Meaning
The RAS handler is already registered. Alternatively, registration of the RAS handler failed.
Action
Collect investigation data according to
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0008 - internal information ITS HOST SOFTWARE ERROR detected. GITS_FJ_
ITS_ERROR_STATUS=DATA1
Meaning
HOST SOFTWARE ERROR was detected in the ITS setting trigger.
DATA1: ITS error status register value
Action
Collect investigation data according to
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0009 - internal information ICC HOST SOFTWARE ERROR detected. GICD_FJ_
ICC_ERROR_STATUS=DATA1
Meaning
HOST SOFTWARE ERROR was detected in the ICC setting trigger.
DATA1: ICC error status register value
Action
Collect investigation data according to
contact Fujitsu Support with the collected data together with the output message.
[ERR.] xos RAS 0010 - internal information ICH ICV GUEST SOFTWARE ERROR detected.
GICD_FJ_ICH_ICV_ERROR_STATUS=DATA1
Meaning
GUEST SOFTWARE ERROR was detected in the ICH or ICV setting initiator.
DATA1: ICH_ICV error status register value
Action
Collect investigation data according to
contact Fujitsu Support with the collected data together with the output message.
"5.3.1 Collecting Information for Maintenance
"5.3.1 Collecting Information for Maintenance
"5.3.1 Collecting Information for Maintenance
"5.3.1 Collecting Information for Maintenance
"5.3.1 Collecting Information for Maintenance
"5.3.1 Collecting Information for Maintenance
73
Purposes," and then
Purposes," and then
Purposes," and then
Purposes," and then
Purposes," and then
Purposes," and then
C120-0089-03EN

Advertisement

Table of Contents
loading

Table of Contents