Table of Contents
Advertisement
Chapter 3 Starting Up
3.18 Installing the InfiniBand Driver
Transfer the above two RPM files to the FX700 node by using the scp command, etc. The following
step assumes that the two files have been transferred to the /SOMEWHERE directory on the FX700
node.
3.
Apply the RPM files.
Apply the RPM files by executing the yum command on the FX700 node.
# yum –y install /SOMEWHERE/FJSVxosbmc-x.x.x-xx.xxx.aarch64.rpm
# yum –y install /SOMEWHERE/FJSVxoscpuras-x.x.x-xx.xxx.aarch64.rpm
4.
Reflect settings.
Execute the following command on the FX700 node to restart the FX700.
# shutdown –r now
5.
Check the installation status.
(1) BMC drivercrlf
If the status of the systemd service FJSVxosbmc is active, installation has been successfully
completed.
# systemctl status FJSVxosbmc
(2) CPU-MEM RAS drivercrlf
If the status of the systemd service FJSVxoscpuras is active, installation has been successfully
completed.
# systemctl status FJSVxoscpuras
3.18
Installing the InfiniBand Driver
The InfiniBand driver (Mellanox OFED) and installation procedure can be found online.
For the Japanese market
https://www.fujitsu.com/jp/products/computing/servers/supercomputer/downloads/
For the global market
https://www.fujitsu.com/global/products/computing/servers/supercomputer/documents/
Only the specified driver versions described on the above sites are supported.
55
C120-0089-03EN
Advertisement
Table of Contents
