Table of Contents
Advertisement
Chapter 3 Starting Up
3.6 Rack System Requirements
Support Upright Hole Shape in the Rack
Other Conditions
The following conditions must be considered in addition to the structural conditions.
-
Cooling performance with the equipment mounted in the rack
Install the rack such that the temperature inside the rack satisfies the temperature conditions shown in
"3.2 Installation
flowing back in through the intake vents of the equipment. For example, block the front of empty
spaces in the rack.
-
Securing work areas for use during maintenance (service areas)
Secure service areas for maintenance work by Fujitsu technicians. Determine the service areas by
referring to the service areas shown for Fujitsu racks in
the document used in rack installation.
Figure 3.5 Support Upright Hole Shape in the Rack
Specifications." In particular, measures need to be taken to prevent exhaust air from
"3.5 Installation Area and Service
32
Areas" and
C120-0089-03EN
Advertisement
Table of Contents
