Troubleshooting; Malfunctions When Starting - ABB TPL69-A33 Series Operation Manual

6
6.1
6.1
© Copyright 2016 ABB. All rights reserved.
Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33

Troubleshooting

Malfunctions when starting

Troubleshooting
Malfunctions when starting
Sluggish start-up
Possible causes
Turbo- Turbocharger contaminated
charger
Damaged bearing
Rubbing rotor
Foreign object in turbocharger
Vibrations
Possible causes
Turbo- Rotor unbalance
charger
Damaged turbine or compressor
Damaged bearing
Rubbing of rotating parts
Normal behaviour, no malfunction
Turbo- Minor uniform wear around the periphery of rotor components,
charger caused by slight local rubbing of adjacent components, is permis-
sible. The compressor blades and turbine blades are then short-
ened somewhat. Certain tolerances must be observed to avoid a
significant loss of efficiency.
 If there is any doubt about the extent of rubbing, then an ABB
Turbocharging Service Station must be contacted.
 Have a dimension check carried out by an ABB Turbocharging
Service Station.
6
6.1
Elimination
Clean it
Contact an ABB Turbocharging
Service Station
Elimination
Contact an ABB Turbocharging
Service Station
Page 73