ABB TPL69-A33 Series Operation Manual page 85

WARNING
© Copyright 2016 ABB. All rights reserved.
Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
Removal and installation
Removing the turbocharger
Ribs (01) not in the middle at the top:

Completely remove the bearing casing insulation (02) and place a

sling around the bearing casing.
Loosen the fixing screws at the foot.

Lift the turbocharger off the engine and set it down to one side.

Beware of tilting
If support for the turbocharger is not provided or is inadequate, the tur-
bocharger could tip over during installation or removal and cause a se-
rious or even fatal injury.
Support the turbocharger at a suitable point.

If possible secure it using lifting gear.

Wear safety helmet.
Cover the oil connection.

7
7.2 Page 83