Samsung HOTEL DCS User Manual page 45

Hotel User Guide
Checking Location of Staff via the Administrator's Phone
Provided staff members have registered their locations as described
above, you can quickly check in which rooms they are located.
1. Press the
SLOCAT
OR
Enter the
SLOCAT
Display shows:
2. Select
SHOW
All programmed keys for rooms in which staff members are lo-
cated will light.
3. To exit the display and turn off key
OR
To clear registered locations and exit, press
If you clear locations, they will not display again until members regis-
ter again from guest-room phones.
Note: A staff member may register in each room as they move between rooms.
Only the most current location will display on the system.
38
key
access code (see above).
Staff Locate
SHOW CLEAR
.
Basic Administration
EXIT
s, press
LED EXIT
CLEAR
.
then .
EXIT