Samsung HOTEL DCS User Manual page 21

Hotel User Guide
PROCEDURE
1. Press the
2. Select
DELETE
3. Enter the room number. Display shows:
If no staff code is required, you see the screen display shown in
step 4, and you should proceed to
4. Enter your staff code. The code is not displayed; instead you see
'QQQQ' in the display. (If you enter an incorrect code, you return
to step 1 to begin again.) You then see this display:
5. Enter the item code. For example, this might be 08 for 'Bar'. (If
the code you enter is not valid, you return to
again.) Display shows:
14
key. Display shows:
BILL
Service Charge No.
ADD
. Display shows:
Enter Room
NUMBER:
Enter Staff Code
Enter Item Code
Enter Item Cost
:XXX.XX
Basic Administration
DELETE
step 5.
step 1 to begin