Table of Contents
Advertisement
Turn the rotary selector to set the required cooking time.
8.
Press the
n
button to start cooking.
9.
The appliance heats up.
For the Steam type of heating, the cooking time starts
counting down after the heating-up time.
"Fill water tank?" message
This message appears if you set a type of heating and the
water tank is only half full.
If you think that the water in the water tank is sufficient for the
cooking procedure, you can start the appliance. If not, fill the
water tank to the "max" mark, slide it back in and start the
appliance.
Current temperature
Press the
button.
°
The current temperature is displayed for 3 seconds.
Changing the temperature
You can change the temperature at any time.
Press the
or
button until the temperature is
X
Y
1.
highlighted.
Change the temperature using the rotary selector.
2.
The change is adopted automatically.
Pause
Briefly press the
n
button to interrupt cooking (pause). The
cooling fan may continue to run. Press the
If you open the appliance door during cooking, operation is
interrupted. Close the appliance door and press the
to restart.
If you have set the basic setting "Continue operation after
closing door" to "automatic", restarting is not required (see
section: Basic settings).
"Fill water tank" message
If the water tank is empty, a signal sounds. "Fill water tank"
appears in the display. Cooking is paused.
Open the appliance door carefully.
1.
Hot steam will escape.
Take out the water tank, fill to the "max" mark and reinsert.
2.
Press the
button.
n
3.
Switching off the appliance
ã=
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the
n
button to end cooking. If you have set a
cooking time, cooking is ended automatically. A signal sounds.
Press the
button to switch off the appliance.
%
The cooling fan may continue running when you open the
appliance door.
After each use
Emptying the water tank.
1.
2.
3.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Drying the cooking compartment
ã=
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
1.
2.
3.
4.
button to start.
n
Recommended settings
button
n
If you choose a dish from the recommended settings, the ideal
setting values are already specified.
You can choose from many different categories. Our
recommended settings include a large number of dishes from
cakes, bread, poultry, meat, fish and game to bakes and
convenience products.
The dishes can be found via several selection levels. Try it out.
see for yourself the variety of dishes.
1.
2.
3.
4.
The cooking time has elapsed
A signal sounds. The appliance stops heating. 00:00:00 is
shown in the display.
Press the
Changing the temperature
You can change the temperature at any time using the rotary
selector.
Open the appliance door carefully.
Hot steam will escape.
Remove and clean the water tank.
Thoroughly dry the seal in the tank cover and the tank recess
in the appliance.
Risk of scalding!
Leave the appliance door ajar until the appliance has cooled
down.
Once it has cooled down, wipe out the cooking compartment
and the evaporator dish with the enclosed cleaning sponge
and dry well with a soft cloth.
Remove food residues from the cooking compartment as
soon as the appliance has cooled. Burnt-on remains will be
much harder to remove later.
Wipe kitchen units or handles if condensation has formed on
them.
Press the
button.
8
"Hot air 160 °C" appears in the display.
Turn the rotary selector anti-clockwise to "Recommended
settings".
The first food category appears in the display.
Press the
button to switch to the food category and select
X
the required category by turning the rotary selector.
(Use the
X
button to move to the next level. Use the rotary
selector to make your next selection).
The setting for the selected dish then appears. You can
change the temperature and cooking time, but not the type of
heating.
Press the
n
button.
Cooking starts. The cooking time appears in the display and
starts to count down.
button to stop the signal.
0
9
Advertisement
Table of Contents
