Table of Contents
Advertisement
Special
Sterilising bottles
Always clean the bottles with a bottle brush immediately after
drinking. Then clean them in the dishwasher.
Place the bottles in the perforated cooking container so that
they do not touch one another.
Dry the bottles with a clean cloth after sterilising. The process
corresponds to normal sterilisation by boiling.
Programme
Sterilising bottles*
Preserving
Eggs/hard-boiled eggs*
Eggs/soft-boiled eggs*
* You can delay the end time for this programme
Memory
The memory function allows you to save a programme of your
own and access it again at the touch of a button. The memory
function is useful for dishes you prepare particularly frequently.
Saving to the Memory function
Specify the heating type, temperature and, if required, a
1.
cooking time or core temperature for the dish you wish to
cook. Do not start operation.
Press and hold the
f
button until "Memory saved" is
2.
displayed.
The memory setting is saved.
If you save another setting using the
overwritten.
Note
-
in 1 litre glass jars
Eggs, size M, Max. 1.8 kg
Eggs, size M, max. 1 kg
button, the old setting is
f
Preserving
This programme is suitable for fruits with a stone and core and
for vegetables (except beans).
Blanch pumpkin before preserving.
The programme is designed for 1 litre jars. For larger or smaller
jars, you must adjust the cooking result individually.
After the end of the programme, open the appliance door to
prevent overcooking in the remaining heat. Leave the jars to
cool down for a few minutes in the cooking compartment.
The programme is designed for firm fruit. If the fruit being used
is no longer firm, adjust the cooking results individually.
Cooking eggs
Pierce the eggs before cooking. Do not place eggs on top of
each other. Size M corresponds to a unit weight of approx.
50 g.
Accessories
Perforated cooking container 2
Perforated container +
Baking tray
Perforated container +
Baking tray
Perforated container +
Baking tray
Starting the memory function
The saved setting can be started at any time.
Press the
button briefly.
f
1.
Press the
n
button.
2.
The memory setting is started.
The setting can be changed at any time. When you start the
memory the next time, the original saved setting appears again.
Level
3
1
3
1
3
1
17
Advertisement
Table of Contents
