Powering On The Ap - Huawei AP4030DN Quick Start Manual

AP4030DN Quick Start Guide
Pay attention to the following points when installing network cables





2.7 Powering on the AP

You can check the power-on status by observing indicators on the AP. For details, see 1.2
Indicator Description
Issue 01 (2015-02-06)
Before connecting an Ethernet cable to the AP, use the cable test tool to check whether
the cable is qualified. If the cable is unqualified, replace it.
Do not connect the service network cable to the console port. Otherwise, the AP may be
damaged when the PoE power supply is used.
Before removing network cables or power cables, remove the AP from the mounting
bracket first to prevent damage to the network cables or power cables.
The cable cannot exceed 100 meters.
Do not frequently power on and off an AP.
华为专有和保密信息
版权所有 © 华为技术有限公司
Contents
19