Related Manuals for Huawei AP6510DN-AGN
Summary of Contents for Huawei AP6510DN-AGN
-
Page 1: Quick Start Guide
AP6510DN-AGN Outdoor Wireless LAN Access Point Quick Start Guide HUAWEI TECHNOLOGIES CO., LTD. - Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
-
Page 3: Symbol Conventions
Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a potentially hazardous situation, which if not avoided, could CAUTION result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important NOTE points of the main text. -
Page 4: Packing List
AP6510DN-AGN Quick Start Guide Please download the detailed product documents from "http://support.huawei.com/support/". The detailed path is as follows: Technical Support->Documentation->Access Network -> WLAN ->WLAN -> Product Documentation -> AP6510DN. 技术支持 Before performing Installation, confirm that the installation accessories and tools are available. - Page 5 Installing an AP ● Select an appropriate installation position and leave space above and around the device for cooling air circulation. ● Outdoors APs are used for hotspot coverage and often installed against walls or poles. The pole diameter is 30 to 114 mm. AP6510DN dimensions (unit: mm) without a backplane support Recommended AP6510DN installation space (unit: mm) ●...
- Page 6 Installing an AP ● Installing the AP6510DN against a vertical pole: 1. Determine the AP installation position, slide the hoop 2. Slide the AP that has the connector fastened into the wall- through the hole of the wall-mounting bracket and attach mounting bracket.
-
Page 7: Installing Cables
Installing Cables ● AP6510DN external cable arrangement drawing Feed line Feed line Feed line Feed line Ground cable Network cable ● Connecting network cables 1. Use a shield straight-through cable. Cut the cable of proper length based on the distance between the AP and the PSE device, peel the insulation on both ends of the network cable, and crimp the wires to RJ45 connectors. - Page 8 Installing Cables ● Connecting the feed line 1. The outdoor AP's antenna ports already have 5 KA surge protection capability. Generally, no surge protection devices need to be installed; therefore, the antenna cables are directly connected to the AP's antenna ports. Feed line Waterproof adhesive tape 2.
- Page 9 Installing Cables ● Requirements for Laying Out Cables ● Requirements for laying out power cables 1. The power cable must be separated from ground cables and signal cables. 2. If multiple power cables are installed, you must bind the power cables. 3.
-
Page 10: Technical Specifications
Power-on NOTE 2 连接线缆 Power on the AP6510DN and check the indicator status to determine the system running status. Description Information Link Wireless Type Steady green The device is being started. The system is working properly. Blinking green Steady red The system fails to load the DRAM or system software. -
Page 11: Logging In To The Router
Logging In to the Router After an AP is powered on, you can log in to the AP using the following methods. 1. Logging In to the AP Using Telnet This section describes how to log in to the AP using Telnet. After logging in to the AP, you can configure the AP using commands. - Page 12 AP Local Configuration WLAN services parameters of an AP are configured on the AC that is connected To the AP, and then delivered to the AP. The following parameters are configured on the AP through Telnet. 1. Configuring the AP Access Mode This section describes how to configure the mode in which an AP goes online.
- Page 13 Enterprise AP (if-ethernet) # 3. Configure a user name and password for going online in PPPoE mode. By default, the user name and password are both wlan@huawei and the password type is simple. Enterprise AP(if-ethernet) # user admin password simple admin //Set the user name and password to admin.
- Page 14 AP Local Configuration 3. Configuring WDS This section describes how to configure WDS parameters on an AP. ● Introduction to WDS WDS enables multiple AP6510DNs to establish wireless links to connect two or more wired or wireless LANs. WDS- enabled AP6510DNs can switch data packets between the LANs. WDS facilitates network deployment, and device installation, and allows flexible networking.
-
Page 15: Declaration On Hazardous Substances In Electronic Information Products
Declaration on Hazardous Substances in Electronic Information Products Hazardous Substances Part Cr6+ PBDE Mechanical part Board/circuit module Signal cable Cable connector Power adapter Auxiliary equipment O: Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is below the limit requirement of the SJ/T 11363-2006 standard. -
Page 16: Warranty Card
In any of the following cases, the warranty card becomes unenforceable or inapplicable without prior notice: 1. The defects are caused by improper handling in transportation and assembly. 2. The defects are caused by the fact that the product is dismantled or altered by anyone that is not from a Huawei authorized service partner. - Page 17 HUAWEI TECHNOLOGIES CO., LTD . Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.com Part Number: 31505366 Issue: 01...