Installing The Air Inlets; Fig. 59: Installing The Air Suction Branch; Table 48: Tightening Torque (27027) - ABB A170-M62 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.13 Installing the air inlets
8.13

Installing the air inlets

8.13.1 Installing the air suction branch
Fig. 59: Installing the air suction branch
Product
A175-M
A170-M
Table 48: Tightening torque (27027)
1. Loop lifting gear around air suction branch.
2. Fit air suction branch together with nuts (72027) and washer (72028). Observe tightening
torque.
Disconnect all air lines according to the instructions of the enginebuilder.
u
Dismantle insulation as far as necessary.
u
© Copyright 2019 ABB. All rights reserved.
Size
M20
M18
HZTL4033_EN
Tightening torque [Nm]
220
170
Rev.D December 2019