Names And Functions - JVC MPEG-2 Instruction Manual

3. Names and Functions

Front Panel
1
2
3
4
5
6
7
8
9
0
!
@
4
1
[10 Mbps] Switch
To set output bitrate to 10 Mbps.
Lights up when selected.
2
[6 Mbps] Switch
To set output bitrate to 6 Mbps.
Lights up when selected.
3
[4 Mbps] Switch
To set output bitrate to 4 Mbps.
Lights up when selected.
4
[3 Mbps] Switch
To set output bitrate to 3 Mbps.
Lights up when selected.
5
[6 Mbps Low Delay] Switch
To set bitrate to 6 Mbps Low Delay (low delay mode).
Lights up when selected.
6
[4 Mbps Low Delay] Switch
To set bitrate to 4 Mbps Low Delay (low delay mode).
Lights up when selected.
7
[3 Mbps Low Delay] Switch
To set bitrate to 3 Mbps Low Delay (low delay mode).
Lights up when selected.
8
[USER] Switch
To set to output bitrate of USER's preset value.
Factory setting is at 1.5 Mbps Low Delay.
Lights up when selected.
9
[HOLD] Switch
To lock/unlock the above switches.
Switches are locked when light is on. Press this button
to unlock before operating the switches.
Light turns off when unlocked.
The above switches will be automatically locked if
left unoperated for 10 seconds.
0
[STREAM] LED
Lights up when stream is transmitted from this equip-
ment to network.
!
[POWER] LED
Green light turns on when power in [ON].
@
Power Switch
Power switch. Depress till a 'click' sound is heard.