Table of Contents
Advertisement
Note
The converter will be supplied on request without an electromechanical door interlocking
system if space is restricted. In this instance, the customer must provide an access interlock
system compliant with IEC 61800-5 /-1.
2.7.4
Instructions for inverters with no grounding switch
Note
The drive does not have a grounding breaker at the input/output. The system operator must,
therefore, ensure that there is sufficient grounding.
2.7.5
Measures for operator protection in electromagnetic fields
The plant operator is responsible for taking the following appropriate measures (labels and
hazard warnings) to adequately protect operating personnel against any possible risk.
• Observe the relevant nationally applicable health and safety regulations or the applicable
national regulations in the country of installation. In Germany, "electromagnetic fields" are
subject to regulations BGV B11 and BGR B11 stipulated by the German statutory industrial
accident insurance institution.
• Display adequate hazard warning notices on the installation.
• Place barriers around hazardous areas.
• Take measures, e.g. using shields, to reduce electromagnetic fields at their source.
• Make sure that personnel are wearing the appropriate protective gear.
2.8
Residual risks
According to the EU machinery directive, machine manufacturers / plant operators must
conduct a risk assessment of their machine. Plant operators must conduct a risk assessment of
their plant. In particular, pay attention to Annex 1 "General Principles" of the EU machinery
directive.
3rd Party LCI Control Upgrade
Operating Instructions, 02/2022, A5E31872818
Safety information
2.8 Residual risks
19
Advertisement
Table of Contents
