Mechanical Installation - General; Contents Of This Chapter; Safety Instructions; Examining The Installation Site - ABB ACS580-01 +C135 Series Original Instructions Manual

Mechanical installation –
General

Contents of this chapter

This chapter generally describes how to mechanically install the drive with the
flange mounting kit.

Safety instructions

Obey the general safety instructions in the hardware manual and the task-specific
instructions in this supplement.
Wear protective gloves and long sleeves. Some parts have sharp edges.

Examining the installation site

Make sure that the installation site complies with these requirements:
• The installation site has sufficient ventilation to prevent overheating of the
drive. See section Losses, cooling data and noise in the hardware manual for
the required air flow in the cooling air channel and in the front part of the drive.
• The operation conditions of the drive agree with the specifications in section
Ambient conditions in the hardware manual.
• The mounting plate is vertical, non-flammable and strong enough to hold the
weight of the drive.
• The material behind, above and below the drive is non-flammable.
Mechanical installation – General 13
3