Resetting the load
display to zero
Weighing system/weighing base
If the machine is equipped with a weighing base, the load weight is
displayed in 0.5 lb (0.2 kg) increments during loading. The maximum
load weight for the selected program is displayed beside it.
Do not place any items on the machine. Do not lean against the
machine.
This can influence the result of the measurement.
If the load display does not show "
display to 0 using the button.
1
Cottons Hygiene
140
°F
Main wash
Rinse
+
If after resetting to 0 (taring), you discover an overlooked item in the
drum, the following will appear in the display:
1
Cottons Hygiene
140
°F
Main wash
Rinse
+
Reset the display to 0 using the button.
Tip: If the machine is overloaded, for example when laundry is wet, it
will operate in accordance with the nominal load after the program
starts. This value is also saved in the operating data module.
At the end of the program when the drum has stopped rotating, the
residual moisture in the laundry is shown in the display.
Whites
1
Programmende
Door can be opened.
0.0
0,0/18,0
1075 rpm
->I<-
--,-/18,0
1075 rpm
->I<-
Residual
60 %
moisture
Optional modules
" with an empty drum, set the
lb
lb
47