To go directly to
Dispensing cali-
bration when the
machine is
switched off:
Dispensing calibration
Dispensing calibration is used to measure the throughput of the indi-
vidual dispenser pumps.
Press and hold multifunction button 2 and switch the machine on
with "Power on".
Dispensing calibration
Dispensing pump 1
Dispensing pump 2
Options:
Dispenser pump 1
-
to
Select a dispenser pump.
When a dispenser pump is selected, the following will appear in the
display:
Dispensing calibration
V:
100 ml
Tip: The dispensing quantity can be set from 0 to 9,999 ml in 1 ml in-
crements.
Press the multifunction button
The dispensing hose will fill up.
Stop the process by pressing the
Run the hose of the dispenser pump upwards into a measuring ves-
sel.
Hold the entire measuring vessel above the dispenser pump while
doing this.
Irritant detergents.
Skin and eye irritation.
Avoid contact with skin and eyes, wear protective clothing.
Return to the main menu by pressing the "Back" button.
Dispensing calibration
Dispensing pump 1
Dispensing pump 2
Select a dispenser pump.
Main menu
13
Dispensing pump 1
t:
0
s
P:
No
0/1
0/1
.
0/1
button.
Main menu
Optional modules
39