Transit Fittings On The Weighing System - Miele PW 6163 Operating Instructions Manual

Transit fittings on the weighing
system
Removing the fittings
Installing the fittings
If the machine is moved again the transit
fittings have to be refitted to the weighing
system. This is to protect the weighing
mechanism.
^ Fit the screws and nuts by hand. Tighten
nut 1 with a suitable spanner. Then adjust
nuts 2 and 3 loosely by hand and then
tighten them up against each other with a
suitable spanner.
Notes for the installer
41