Mitsubishi Electric MELSECQ Series User Manual page 16

2
SYSTEM CONFIGURATION
Table2.1 Applicable modules, number of mountable modules, and applicable base units (Continued)
Applicable CPU module
CPU type
Programmable
controller CPU
C Controller module
2
- 2
Downloaded from ManualsNet.com
CPU model
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Universal model
Q13UDEHCPU
QCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Q100UDEHCPU
Safety CPU QS001CPU
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
* 1 Limited within the range of I/O points for the CPU module.
* 2 Can be installed to any I/O slot of a base unit.
* 3 For the coincidence detection interrupt function, use the Basic model QCPU module of function
version B or later.
* 4 The coincidence detection interrupt function is not supported.
(b) Mounting to a MELSECNET/H remote I/O station
The table below shows the network modules and base units applicable to the
QD63P6 and quantities for each network module model.
Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if the
power supply capacity is insufficient, change the combination of the modules.
Table 2.2 Mountable network modules, No. of mountable modules, and mountable base unit
Applicable network
*3*4
module
QJ72LP25-25
QJ72LP25G
QJ72LP25GE
QJ72BR15
* 1 Limited within the range of I/O points for the network module.
* 2 Can be installed to any I/O slot of a base unit.
* 3 The coincidence detection interrupt function is not supported.
* 4 The dedicated instructions are not supported.
Remark
The Basic model QCPU or C Controller module cannot create the MELSECNET/
H remote I/O network.
2.1 Applicable Systems
search engine
No. of
*1
modules
Up to 64
N/A
Up to 64
*1
Main base unit of
No. of modules
remote I/O station
Up to 64
*2
Base unit
Extension base
Main base unit
: Applicable
*2
Base unit
Extension base unit
of remote I/O station
: Applicable
unit
: N/A
: N/A