Mitsubishi Electric MELSECQ Series User Manual page 112

7
PROGRAMMING
<Enabling interrupt of I50>
<Interrupt program>
7
- 14
Downloaded from ManualsNet.com
(3) Program example
An interrupt must be enabled using the IMASK instruction before using an interrupt
pointer.
POINT
• When the above described program is executed, only I50 interrupt
program is execution-enabled and other interrupt programs are
execution-disabled.
When executing interrupt programs other than I50, set the corresponding
bit for interrupt program to be executed to 1 (enabled).
• For details of the IMASK instruction, refer to MELSEC-Q/L Programming
Manual (Common Instruction).
7.3 Program Example when the Coincidence Detection Interrupt Function is Used
search engine
QD63P6 program
Interrupt program