Sanyo PLV-HD2000E Owner's Manual page 18

BEFORE OPERATION
FRONT INDICATORS
LAMP REPLACE indicator
This LAMP REPLACE
indicator lights yellow when
any of Projection Lamps is
nearing its end, and flashes
when any of them becomes
out. Check which lamp
needs to be replaced on
Lamp Status Display.
(P43-44, 48)
18
INDICATORS
READY
WARNING
TEMP.
LAMP
REPLACE
WARNING TEMP. indicator
This indicator flashes red
when internal projector
temperature is too high.
(P42, 48)
REAR INDICATORS
LAMP
READY indicator
This indicator lights green
when a projector is ready to
be turned on. And it flashes
green in Power Management
mode or internal projector
temperature is too high.
(P40, 42, 48)
LAMP indicator
This indicator is dim when a
projector is turned on. And
bright when a projector is in
stand-by mode. (P48)