Preface - Hitachi PRIMAIDE 1440 Instruction Manual

PREFACE

Thank you very much for purchasing Primaide 1440 FL Detector.
The Primaide 1440 FL Detector is specifically designed for fluorescence
detection of sample components in a liquid chromatograph system.
Note that physiologically or biologically active samples are not applicable
to the Primaide 1440 FL Detector because of possible infection with
bacteria or viruses.
This product is intended for use by persons having a basic
knowledge of chemical analysis.
Remember that improper use of analytical instruments, chemicals
or samples would result not only in wrong analytical data but also in
consequences adverse to safety. Note that it is allowed only for
persons having a basic knowledge of chemical analysis procedures
to use this instrument.
Carefully read this instruction manual before attempting operation. For
proper use of the software, please acquaint yourself with it.
The liquid chromatograph system comprises a pump unit for delivering
mobile phases, a sample introduction unit for injecting samples
(autosampler, manual injector), a column unit for separating components
of each sample, a column oven unit for maintaining the column at a
constant temperature, and a detector unit for detecting separated sample
components as electric signals. Before using the liquid chromatograph
system, read carefully the instruction manual accompanying each of
these units so that you can carry out analysis properly.
- 1 -