Toro 51484 Operator's Manual page 9

4
Adjusting the Auxiliary
Handle, Trimmer Height,
and Base Position
No Parts Required
Procedure
•
To adjust the auxiliary handle height, release the
auxiliary handle latch, slide the auxiliary handle
up or down to the desired height, then secure the
auxiliary handle in place by closing the auxiliary
latch (Figure 4).
1. Auxiliary handle
2. Auxiliary handle latch
•
To adjust the trimmer height, open the height
adjustment latch, then slide the shaft up or down
to desired height, securing it in place with the latch
(Figure 4).
•
To adjust the position of the base, press down on
the rotator button located at the base of the shaft,
then move the base to face the desired direction
(Figure 5).
Figure 4
3. Height adjustment latch
1. Rotator button
g015655
9
Figure 5
g017507