NEC Express5800 Series User Manual page 16

1-4
Notes on Using Your Tape Blade
CAUTION
Avoid installation in extreme temperature conditions.
Immediately after the Tape Blade is powered off, its internal components and
components in Blade Enclosure are very hot. Leave them until their internal
components fully cool down before installing/removing any component.
Do not insert your hands into the cartridge load compartment.
Do not insert your hands into the cartridge load compartment. Otherwise, the
fingers will be caught/pinched by the LTO to cause an injury.
Avoid contact with the CPU blade and Tape Blade during thunderstorms.
Disconnect the power plug from the outlet when a thunderstorm is
approaching. If it starts thundering before you disconnect the power plug, do
not touch any part of the CPU blade and Tape Blade including the cables.
Failure to follow this warning may cause a fire or an electric shock.
Keep animals away from the CPU blade and Tape Blade.
Pet's discharges or fur may enter the CPU blade and Tape Blade and cause
a fire or electric shock.