Panasonic WX-SA250P Operating Instructions Manual page 32

Antenna placement
X Floor settings ([Steps settings])
Normally, use the system with the default settings.
[Standard antenna on floor directly below]:
[No standard antenna on floor directly below]: Select this when there is no standard antenna on floor directly below.
[Standard antenna on floor directly above]:
[No standard antenna on floor directly above]: Select this when there is no standard antenna on the floor directly
Default settings:
If you select [Standard antenna on floor directly below (above)], the antenna placement analysis is made by calculating
the influence from the standard antenna(s) from above and/or below floor(s). For example, if there is a standard antenna
of a WX-SR200P system with a large field selection installed on the floor above, set [Standard antenna on floor directly
above]. Furthermore, also set [Standard antenna on floor directly below (above)], for performing tests if there are difficult
conditions such as when you think there will be influence from an antenna on the floor above or below due to an atrium
space or you when think there will be influence from an adjacent building.
Important
X [Delete]
Delete an antenna.
● After clicking to select the target antenna, you can also change the antenna settings from [Antenna
settings] in the menu.
Select this when there is a standard antenna on the floor directly
below.
Select this when there is a standard antenna on floor directly above.
above.
[No standard antenna on floor directly below] /
[No standard antenna on floor directly above]
32