Introduction; Function Overview; About This Manual; System Requirements - Panasonic WX-SA250P Operating Instructions Manual

1.9 ghz digital wireless microphone system antenna placement support tool
Table of Contents

Advertisement

Introduction

Function overview

Antenna Placement Support Tool (hereinafter referred to as "this software") is software for considering the installation design of
the following devices in advance on a personal computer (hereinafter referred to as "PC").
Wireless antenna:
WX-SA250P
Wireless microphone: WX-ST200P, WX-ST400P
● This software is a tool to analyze the number of microphones that can be used in Panasonic's 1.9 GHz digital
Important
wireless microphone systems. Use it as a guide to wireless microphone system installation after paying
attention to the following points.
● The calculation used for analysis is the general propagation equation, and the assumption is that the ceiling
height is up to 4 meters.
● The typical value for insertion loss is applied as the default value.
● To simplify analysis, this software does not consider factors such as the floors above and below as analysis
is limited to only two dimensions.
● To simplify analysis, this software does not consider objects that shield radio waves as analysis is limited to
only considering room sizes.
Final checks should be made at the installation location of the wireless microphone system.

About This Manual

● This manual describes how to operate Antenna Placement Support Tool for 1.9 GHz digital wireless microphone systems. For
information on the functions of the equipment, refer to the operating instructions supplied with the products.
● The software version information and other screen images shown in this manual are display examples and may differ from the
actual screens.

System requirements

This software can be used on a PC with the following system environment.
Operating system*
1
CPU
Memory
Hardware disk free space There must be 100 MB of free space to install this software.
Important
Screen
*1 This software is designed using the default styles and font sizes of Microsoft Windows 7, Microsoft Windows 8.1, and
Microsoft Windows 10. Be sufficiently careful when changing a style or font size.
● Microsoft .NET Framework 4.5.2 is required to run this software.
● With regards to .NET Framework, operation in the following environments has been verified.
Windows 10: .NET Framework 4.6.2
Windows 8.1: .NET Framework 4.5.2
Windows 7: .NET Framework 4.5.2
English version of Microsoft Windows 10 Pro
English version of Microsoft Windows 8.1 Pro
English version of Microsoft Windows 7 Professional
The PC must be equipped with a CPU recommended for use with the above operating systems and
Microsoft
.NET Framework 4.5.2.
®
The PC must be equipped with the memory recommended for use with the above operating systems
and Microsoft .NET Framework.
Microsoft .NET Framework is required to use this software.
If it is not installed, additional free space to install Microsoft .NET Framework is required.
Resolution of 1280x800 pixels or higher
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx-st200pWx-st400p

Table of Contents