Step4: Microphone Placement/Analysis - Panasonic WX-SA250P Operating Instructions Manual

Easy wireless design operation flow

STEP4: Microphone placement/analysis

When you click the [Antenna location complete] button, the screen switches to the [Mic location/analysis] screen again. In the
[Used microphone list], input the number of microphones to be used in each area. When inputting the number of microphones is
complete, click the [Location analysis] button.
Microphone installation procedure
1
Input the number of microphones.
Input the number of microphones to be used in each area in the [Used microphone list].
2
Click the [Location analysis] button.
Microphone placement analysis begins. Check that the result is "OK".
If result is "Invalid", the number of antennas of any invalid area turns red. Increase or decrease the number of microphones
in the invalid area and then click the [Location analysis] button again and check the number of microphones that can be
used.
3 Important
Select the [4.Output] tab.
The screen switches to the [Output] screen. The models and quantities required for the installed wireless system are
displayed and you can create the estimate (price) and print the result.
● For details on microphone placement and analysis, refer to "Microphone analysis" (page 34).
● For details on the [Output] screen, refer to "Print" (page 37).
3
13
1
2