Mapping
Setting the reference length
Set the reference length to serve as the reference dimension for input areas. The reference length will be the reference for the
distance to use when calculating wireless interference between placed antennas. Always set it.
Reference length setting procedure
1
Click the reference length arrowed line.
2
Adjust the angle, length, and position of the reference length arrowed line.
Adjust the length and position of the reference length arrowed line to match the size of the area. If you right-click the
arrowed line, you can change the angle of the arrowed line. For example, if the dimension is shown on the loaded map,
adjust the length of the reference length arrowed line to match that dimension.
22