Replacing Shuttle Valves - Beko Drypoint ACC 4 Instruction/Technical Manual

Section 6: Maintenance
Replacing Shuttle Valves (Top and Bottom)
Models 4 SCFM – 35 SCFM
• Remove either tower
• Pull out shuttle seat
• Remove shuttle
• Replace shuttle
• Reinsert shuttle seat
• Re-secure tower
Important information
Bottom shuttle removal shown. Same process used for top
shuttle removal and installation.
Tools required
• 5mm hex key
Heatless Desiccant Dryers | Instruction Manual
Figure 6.23: 4 SCFM – 35 SCFM Filter and tower removal
Figure 6.24: 4 SCFM – 35 SCFM Shuttle seat and shuttle removal
Top Shuttle Valve
Location
Bottom Shuttle Valve
Location
31