Exhaust - Beko Drypoint ACC 4 Instruction/Technical Manual

Section 6: Maintenance
Exhaust Silencer Changeout
Models 4 SCFM – 35 SCFM
• Remove dryer front panel.
• Unscrew silencer from bottom valve block and remove.
• Replace with new silencer.
• Ensure spacers are placed between silencer and valve
block.
Tools required
• Not required
Important information
Ensure shutdown and start-up procedures are followed
prior to carrying out any maintenance work on the dryer.
The manufacturer will not accept responsibility for
physical injury, damage or delays caused by failure to
observe the instructions in this manual and manuals
provided with your equipment.
Heatless Desiccant Dryers | Instruction Manual
Figure 6.15: 4 SCFM – 35 SCFM Silencer changout stage 1
29