Huawei R100020G1 User Manual page 21

R100020G1 Charging Module
User Manual
Setting the Hardware Address
●
●
Table 2-7 Procedure description
Procedure
1
2
3
4
5
Setting the Group Number
●
●
Issue 05 (2021-11-16)
To set the hardware address, you do not need to switch to the dEG mode.
The hardware address settings of the charging module are saved upon power
failure.
Operation
Press the left or right button to
switch to the hardware address
display screen.
Hold down the left or right button
to enter the hardware address
display screen.
Hold down the left or right button
to enter the hardware address
setting screen.
Press the left button to switch
between the high-, middle-, and
low-order nixie tubes. Press the right
button to adjust the value.
Hold down the left or right button
to save the settings.
To set the group number, you do not need to switch to the dEG mode.
The group number settings of the charging module are saved upon power
failure (only for the company protocol).
Table 2-8 Procedure description
Procedure Operation
1 Press the left or right button to
switch to the group number display
screen.
2 Hold down the left or right button
to enter the group number display
screen.
3 Hold down the left or right button
to enter the group number setting
screen.
Copyright © Huawei Digital Power Technologies Co., Ltd.
2 Overview
Nixie Tube Display
Adr (static)
Hardware address (decimal,
static)
High-, middle-, or low-
order nixie tube blinking
(decimal)
Adjusted hardware address
(high-, middle-, or low-
order nixie tube blinking)
Hardware address (static).
Then, the voltage display
screen is displayed.
Nixie Tube Display
GrP (static)
Group number
(decimal, static)
Middle- or low-order
nixie tube blinking
(decimal)
15