Table of Contents
Advertisement
SERVICE MODE
C. Market information setups.
1. Entering to "Service mode entry"
Following the instruction listed on "How to enter Service
mode entry" above.
2. Displaying Internal Set up screen
Push NEXT button within 5 seconds after entering "Service
mode entry". Market code area is highlighted on the Internal
Set up screen.
On the Internal Setup screen shown on the right, set up
Market and Region.
The highlighted area can be select by cursor up and down
key on the remote controller.
Select and input "Market" , "Region" , "Tuner Selection"
and "RDS Availability".
3. Setting Market code
3.1.While a highlighted indicator is displayed on the right
side of the Market denotation , push numeric keys or
cursor right and left keys on the remote controller to
select Market code as listed on Market information setup
table.
If you enter the wrong number , just keep on inputting the
numeric keys , the inputted number displayed on the
screen is shifted to the left.
Market code of this model is "02".
3.2 Once the desired code is displayed , push cursor down key
to highlight the Region code area or push cursor up key to
highlight the EXIT area.
Notice : Every time the highlight moves from "Market
code area" to the other area,
"Region","Tuner Selection" and "RDS Availability"
parameters are automatically selected as shown on Market
information setup table.
All manuals and user guides at all-guides.com
(Reference figure)
(Reference figure)
(Reference figure)
- 10 -
Advertisement
Table of Contents
