Paddle Installation (continued)
Scraper Replacement
Scraper Removal
POWER CLEAR® 721/821 Snowthrower Service Manual
3438-776 Rev A
g321394
2. Install the 4 (1/4-20 x 3/4 inch) Torx head screws securing the paddles
together.
g321393
1. Park the machine on a level surface. Stop the engine, wait for all moving
parts to stop and remove the key.
2. Flip the machine over so the auger housing is facing the floor. Remove the
springs from the LH and RH sides of the scraper.
Figure 84
Figure 85
Page 6–13
Drive System: Service and Repairs