Canon BESTEM-D01R Manual page 55

3. Adjustment Mode 3. Adjustment Mode
④
Unit Selecting Button
～
To check for IN (input) ....
Display sequence
1. Select unit for input with "④ unit selecting button".
2. Display item to check with page scroll buttons (Top, Prev, Next, Last).
3. Select [IN] at "③input/output swap button".
4. Activate sensor (ON/OFF) of item to be checked.
"② input/output status display" will turn to yellow.
Sensor is functioning correctly if "② I/O status" corresponds to ON/OFF by looking at the button
color changes. If the display does not change, either the sensor is damage or connector is loose or
there is connection defect. Please check.
To check for OUT (output) ....
Display sequence
Select unit for input with "④ unit selecting button".
Display item to check with page scroll buttons (Top, Prev., Next, Last).
Select [OUT] at "③ input/output swap button".
Click "② I/O display button" of item to be checked (ON/OFF).
"② input/output status display" will turn to yellow.
Sensor is functioning correctly if "② I/O status" corresponds to ON/OFF by looking at the button
color changes. If the display does not change, either the sensor is damage or connector is loose or
there is connection defect. Please check.
OM0001
OM0001
3-13