Canon BESTEM-D01R Manual page 51

3. Adjustment Mode
⑥
Up/down input range
⑨
◆ To carry out teaching ....
Display sequence
1. Select the unit to be taught with "⑨ unit selecting button".
2. Select the item to be taught with "① item selecting button".
"② item number and name display" will turn to blue.
When manual operation is required midway, select the item to be operated with "③manual
operation item selecting button" and press ON/OFF switch on operation panel.
3. When JOG key on operation panel is pressed continuously, operation will be done. Adjust it to the
position to be set.
4. Press
To carry out manual operation...
Display sequence
1. Select the unit to be operated with "⑨ unit selecting button".
2. Select item to be operated with "③ manual item selecting button".
"④ item number and name display" will turn to blue.
3. Press ON/OFF switch on operation panel to commence operation.
OM0001
Min value
Current value
⑦
Confirmation button
Unit selecting button
～
to input the data.
⑧
Display each axis position.
Use ▲▼ to swap the pages.
3-9
3. Adjustment Mode
Max value
OM0001