Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Bolt (5/16 x 3/4 inch)
Washer (5/16 inch)
Nut (5/16 inch)
Circulation hose
Hose clamp
Media and Additional Parts
Description
Transfer hose
Connecting the Battery
WARNING
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm. Wash
hands after handling.
1.
Remove the red plastic cover from the positive
battery terminal
(Figure
Qty.
2
2
2
1
2
Qty.
1
3).
Connect the battery.
Connect the pump to the tank.
Connect the mixer to the drill.
1. Red cover
2. Positive cable
2.
Use a bolt (5/16 x 3/4 inch), a washer, and a nut
(5/16 inch) to mount the positive cable to the
positive battery terminal.
3.
Remove the black plastic cover from the
negative battery terminal.
6
Use
Use
Figure 3
3. Black cover
4. Negative cable
g024037