Table of Contents
Advertisement
Maintenance
Important:
Before performing any maintenance procedures, first shut off the engine and wait 5 minutes
to allow all moving parts to come to a complete stop and cool.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 25 hours
After the first 50 hours
Before each use or daily
After each use
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Important:
Refer to your engine owner's manual for additional maintenance procedures.
Pre-Maintenance
Procedures
Pre-Maintenance Safety
•
Before adjusting, cleaning, repairing, or leaving
the machine, do the following:
– Move the machine on a level surface.
– Shut off the engine and remove the key.
– Wait for all moving parts to stop.
– Allow machine components to cool before
performing maintenance.
•
If possible, do not perform maintenance while the
engine is running. Keep away from moving parts.
•
Use adequate support to support the machine or
components when required.
•
Carefully release pressure from components with
stored energy.
Maintenance Procedure
• Change the engine oil.
• Inspect and clean the engine-oil filter.
• Inspect the air-cleaner element.
• Check the engine-oil level.
• Clean the machine.
• Clean the air-cleaner element. Clean it more frequently in dusty operating conditions.
• Clean the inlet fuel screen.
• Lubricate the pump.
• Change the engine oil.
• Check the battery cable connections.
• Replace the air-cleaner element. Replace it more frequently in dusty operating
conditions.
• Replace the outlet fuel filter.
• Inspect and clean the engine-oil filter.
Preparing the Machine for
Maintenance
1.
Park the transport vehicle on a level surface and
chock the tires, or remove the machine from the
transport vehicle.
2.
Ensure that the engine and muffler are cool.
3.
Turn the electric-start switch to the O
15
position.
FF
Advertisement
Table of Contents
