Removing, Repairing And Exchanging; Product Lifecycle; Checking Ied Information - ABB SAM600-IO Installation Manual

Hide thumbs Also See for SAM600-IO:

Table of Contents

1MRK 514 030-UEN Rev. C

Section 8

8.1

At some point of the product lifecycle, the IED will be upgraded to a next generation unit. When

selecting the original product, already consider the upgrading and extension possibilities that the

specific product offers for its whole lifecycle.

8.2

The IED information includes detailed information about the device, such as version and serial

number. To find the information navigate through the LHMI menus as indicated below:

Select Main Menu /Diagnostics/IED status /Product identifiers .

Select a submenu with

Enter the selected submenu with

Browse the information with

The Product identifiers submenu contains product related information including product type,

product version, product definition, firmware version, serial number, order number and production

date.

The Installed HW submenu contains information about the HW modules.

The IED information can be retrieved through PCM600, properties window and IED summary. See

Figure

Switchgear control unit SAM600-IO

Installation manual

Removing, repairing and exchanging

In order to get the following information in SAM600-IO, the service kit is needed. For

more information on service kit, refer SAM600-IO Technical manual.

and

Section 8

Removing, repairing and exchanging

GUID-D1A48469-E2DB-4E39-8431-1686F13FFC4D v8

GUID-2CAE273B-B384-438A-B21C-C0BC86E203A1 v3

Table of Contents