ABB SAM600-IO Installation Manual page 12

Hide thumbs Also See for SAM600-IO:

Table of Contents

Section 1

Introduction

For example, the function can be enabled and disabled with the Operation setting.

•

Each function block symbol shows the available input/output signal.

•

Dimensions are provided both in inches and millimeters. If it is not specifically mentioned then

the dimension is in millimeters.

the character ^ in front of an input/output signal name indicates that the signal name may

be customized using the PCM600 software.

the character * after an input signal name indicates that the signal must be connected to

another function block in the application configuration to achieve a valid application

configuration.

1MRK 514 030-UEN Rev. C

Switchgear control unit SAM600-IO

Installation manual

Table of Contents