Mitsubishi Electric Melsec Q Series User Manual page 114

9 Troubleshooting
Error code Error
(HEX) level
100Dh Low
Low
100Eh
100Fh Low
0000h -
* Also check that it is set in decimal.
Descriptions
Primary voltage of VT is set out of
range.
Secondary voltage of VT is set out
of range.
Primary current of CT is set out of
range.
Normal
Set primary voltage of VT within
the range* of 0 to 6600 (V).
However, this setting cannot set
0 (any setting) when primary
voltage (Un¥G1) is 0.
Set secondary voltage of VT
within the range* of 0 to 220 (V).
However, this setting cannot set
0(any setting) when primary
voltage (Un¥G1) is 0.
Set primary current of CT within
the range* of 0 to 6000 (A).
However, this setting cannot set
0(any setting) when primary
current (Un¥G2) is 0
-
9 - 2
Action Reference
QE81WH
Section
6.2.2
Section
6.2.2
Section
6.2.3
-