ENGINE / COOLING SYSTEM
10. Select appropriate bearing insert (color) from table
(Connecting Rod Bearing Selection Chart).
MEASUREMENT
Connecting Rod (Big End) Diameter:
1.8892 - 1.8902" (47.987 - 48.011 mm)
Connecting Rod (Big End) Concentricity:
< 0.00047" (0.012 mm)
CONNECTING ROD BIG END BEARING
SELECTION
1. If using new connecting rods, install the bearing color
that matches the bore tolerance letter marked on the
q
connecting rod cap
2. If re-installing the original connecting rod, select the
appropriate bearing from the table below based on
connecting rod big end I.D. measurements.
3.60
.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.