Adjustment - Sharp DX-SX1H Service Manual

DX-SX1H
TEST MODE
Description of the test mode
1. How to enter the test mode
In the no disc mode and the tray eject mode, press the SACD/CD button and the track down button more than two seconds.
Display: F 0 _ _ 0 0 0 0 0
1
2. Entering a desired test mode
Version check
Press the SACD button to enter this mode.
Display: 1 0 _ 9 0 9 2 8
2 Year/Month/Day
Mechanism test
Press the STOP button to enter this mode.
(In case of the no disc mode, eject the tray.)
3
Display: 2 0 _ 0 0 0 0 0
Dynamic test
Press the PAUSE button to enter this mode.
(In case of the no disc mode, eject the tray.)
4 Display: 3 0 _ 0 0 0 0 0
FIP test
Press the PLAY button to enter this mode
Display: All lamps lit up.
Press the PLAY button again to return to the initial test mode
Display: F 0 _ 0 0 0 0 0
1
3. Version check mode
Program date
Display: 1 0 _ 9 0 9 2 8
2 Year/Month/Day
Model number (Press the PLAY button in the step
Display: 1 0 _ 0 0 0 1 0
3
Model number
Version (Press the PLAY button in the step
Display: 1 0 _ A 0 0 0 1
4 Version number
Then press the PLAY button to return to the initial test mode.
Display: F 0 _ 0 0 0 0 0
1
4. Mechanism test
(In case of the no disc mode, eject the tray.)
2 Display: 2 0 _ 0 0 0 0 0
Tray mechanism aging mode (Press the OPEN/CLOSE button in the step
Display 2 1 _ 0 0 0 0 5
3
Number of times of aging
Sled motor aging mode (Press the PLAY button in the step
Display: 2 2 _ 0 0 0 0 5
Number of times of aging
1
5. Dynamic test
(In case of the no disc mode, eject the tray.)
2
Display: 3 0 _ 0 0 0 0 0
Tray load (Press the OPEN/CLOSE button in the step
3
Display: 3 0 _ 0 0 0 0 0
Laser test mode (Press the STOP button in the step
4
Display: 3 1 _ 0 0 0 0 0 (Check the slide feed.)
Step execution mode (Press the PAUSE button in the step
5
Display: 3 2 _ 0 0 0 0 0
Continuous playback mode (Press the PLAY button in the step
Display: 3 3 _ 0 0 0 0 0

ADJUSTMENT

Program date
1
.)
2
.)
1
.)
1
.)
2
.)
2
.)
2
– 10 –
1
.)
.)