OPERATING INSTRUCTIONS
Adjusting the headlights:
1.
Loosen the nut that secures the head lights to the bracket.
2.
Adjust the headlights into position by hand.
3.
Tighten the nut to hold the light in the correct position.
Brake lights:
The light assembly is operated when the operator lifts their foot
off of the forward pedal or when reversing the machine.
MAINTENANCE
Replace all worn or damaged parts with genuine Toro parts.
Check that all lights are working on a regular basis.
Head lights - replacing a bulb:
1.
Remove the lense cover.
2.
Replace the bulb.
3.
Replace the lense cover.
4.
Adjust lights to ensure that they comply with local road
legislation.
SPARE PARTS
Bulb headlamp H4
Issued: 24.03.11
Part No. 924632.
Approved:
Mod. No. 5062856.A
Sheet 10 of 12
Part No. 111-5100 (A)