1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lighting Equipment
  5. 02900
  6. Fitting and operation instruction sheet

Toro 02900 Fitting And Operation Instruction Sheet

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Spellbrook, Bishop's Stortford, Herts. CM23 4BU, England.
Telephone: 01279 723444 Fax: 01279 723821 E-mail: sales@hayter.co.uk
Service@hayter.co.uk Web: www.toro.com / www.hayter.co.uk
FITTING AND OPERATION INSTRUCTION SHEET
ROAD LIGHT KIT INCLUDING BRAKE LIGHTS
Model 02900
For CT2120 and CT2140
Models 30655 and 30656
ORIGINAL VERSION (EN)
Serial No. From 311000001
CONTENTS
Contents

INTRODUCTION

This kit is designed to provide a full set of road lights with mounting brackets and operating switches.
This is suitable for the CT2120/2140 with front ROPS bar only.
These instructions include safety, specifications, delivery check list, maintenance, fitting and operating instructions.
These instructions should be considered as part of the machine.
For all other information refer to your Operator's Manual and Parts List.
In pursuit of continuous product development, TORO reserve the right to alter specifications without notice.
Left and Right: Throughout this manual refers to the mower when looking in the direction of forward travel.
NOTE: This instruction sheet must be printed in colour.
Issued: 24.03.11
Page No.
1
2
2
3
4
5 - 9
10
10
11
11
12
Approved:
Mod. No. 5062856.A
Sheet 1 of 12
Part No. 111-5100 (A)

Advertisement

Table of Contents
loading

Related Manuals for Toro 02900

Summary of Contents for Toro 02900

  • Page 1: Table Of Contents

    For all other information refer to your Operator’s Manual and Parts List. In pursuit of continuous product development, TORO reserve the right to alter specifications without notice. Left and Right: Throughout this manual refers to the mower when looking in the direction of forward travel.

  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED. EXERCISE GREAT CARE AND FOLLOW THE ADVICE GIVEN TO AVOID POTENTIAL HAZARDOUS SITUATIONS Before working on the machine it is essential that you read and understand the Safety Precautions as shown in the Operator’s Manual.

  • Page 3: Delivery Check List

    DELIVERY CHECK LIST ITEM NO. DESCRIPTION PART NO. QTY. NOTE FUSE - 10 AMP 70-09-026 FUSE - 15 AMP 70-09-151 SWITCH - HAZARD WARNING - CARLING 111-2223 CARLING SWITCH - INDICATOR 111-2244 CARLING SWITCH - LIGHTS 111-2252 LIGHT BRACKET - RIGHT BLACK 111-3119-03 LIGHT BRACKET - LEFT BLACK 111-4765-03...

  • Page 4: Delivery Checklist Exploaded View

    DELIVERY CHECKLIST EXPLOADED VIEW Fig 1 Issued: 24.03.11 Approved: Mod. No. 5062856.A Sheet 4 of 12 Part No. 111-5100 (A)

  • Page 5: Fitting Instructions

    FITTING INSTRUCTIONS The LED rear indicators and rear red tail lights / stop lights attach to the outside of the ROPS post on the left and right side and use exist- ing bolt holes in the ROPS. The headlights, front indicators and front white marker lights attach to the front ROPS hoop.
  • Page 6 FITTING INSTRUCTIONS Continued Fig 3 Black Black Num. Plate Black BLANK Black Green BLANK Black White Indicator Green Green Black White Brown Stop/Tail Orange 17. Put these three screws through the three holes in the upper light mounting position so that the red stop/tail lamp is mounted on the rear face with the screws pointing through on the front face.
  • Page 7 FITTING INSTRUCTIONS Continued 32. Connect the other end of the connector lead (item 19) to the main loom connector located on the electrical mount panel. 33. Repeat this assembly procedure for the lights and connections on the right hand side of the machine. 34.
  • Page 8 FITTING INSTRUCTIONS Continued 47. The cables must now be connected to the main wiring loom of the machine and this is done with a connector lead (item 42). It is important that the following connections are correctly carried out. Refer to Fig 6. Fig 6 Black White...
  • Page 9 FITTING INSTRUCTIONS Continued 59. The final part to be fitted is the pressure switch that controls the Fig 8 brake lights. This is screwed into the main transmission line. + BR 60. Locate the three hose connections on the right side of the transmission pump.

  • Page 10: Operating Instructions

    The light assembly is operated when the operator lifts their foot off of the forward pedal or when reversing the machine. MAINTENANCE Replace all worn or damaged parts with genuine Toro parts. Check that all lights are working on a regular basis. Head lights - replacing a bulb: Remove the lense cover.

  • Page 11: Notes

    NOTES Issued: 24.03.11 Approved: Mod. No. 5062856.A Sheet 11 of 12 Part No. 111-5100 (A)

  • Page 12: Warranty

    Countries Other than the United States or Canada Customers should contact their Toro Distributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor’s service or have difficulty obtaining guarantee information, contact the Toro importer. If all other remedies fail, you may contact us at Toro Warranty Company.

Table of Contents