Sharp PN-L803C Service Manual page 68

1-2．SERVICE MENU 2
AGING
AGING -> See "2. AGING"
CALIBRATION
Auto adjust GAIN and OFFSET only for
D-SUB[COMPONENT] and D-SUB[VIDEO].
-> See "3. CALIBRATION"
FACTORY RESET
Reset USAGE TIME and OPERATION LOG etc
in addition to USER ADJUSTMENT VALUE.
-> See "4．FACTORY RESET"
MODEL TYPE Switching of the destination:
JP : Mode l for Japan
US：Model for North America
EU：Model for Europe
CH:Model for CHina
When the destination is changed, the model
name is changed. JP and US are the same
model name. EU and CN are the same model
name.
HARDWARE Show the hardware check result.
CHECK Switch ON/OFF the settings of the hardware
check and the display of the hardware check
result.
-> See "*.Hardware check".
WHITE BALANCE -> See "8. How to Adjust White Balance "
SETTING
-> See "8. How to Use White Balance "
EDID UPDATE
Update the EDID to the latest version.
-> See "* How to update the EDID."
GAMMA SETTING
Set the Gamma settings.
-> See "8. How to Adjust Gamma settings "
-> See "8. How to Use Gamma setting tool "
AUTO INPUT
CHANGE DELAY
Do not change these settings.
SIGNAL TUNING
LED DRIVER DC
1) Select "SERVICE2" with [VOL -()] key while displaying
"SERVICE MENU1" screen. Press [ENTER] key.
SERVICE1 SERVICE MENU2
SERVICE2
AGING
CALIBRATION
SERVICE3
FACTORY RESET
MODEL TYPE
HARDWARE CHECK
WHITE BALANCE SETTING
EDID UPDATE
GAMMA SETTING
2）Select the setting item with [VOL + ()], [VOL - ()] keys.
3）Make adjustment with [BRIGHT - ( )],[BRIGHT + ()] keys.
As for items with => mark, press [ENTER] key to go on to the
next screen.
4）Press [MENU] key to exit.
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4 - 2
1/2
=>
=>
XX
=>
=>
=>
=>
OK [ENTER] END
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
1-3. SERVICE MENU 3
MODEL NAME SETTING
S/N SETTING
USAGE TIME SETTING
SYSTEM LOG INITIALIZE
TEMP LOG INITIALIZE
SAVE LOG
SAVE/RESTORE
SETTINGS VALUE
POWER OFF COUNT
1 ) With "SERVICE MENU1" display.
Select "SERVICE3" with [VOL - ()] button and press [BRIGHT+
()] button.
SERVICE1
SERVICE2
SERVICE3
2 ) Select setting item with [VOL+()] [VOL- ()] button.
3 ) Press [BRIGHT+ ()] button and advances to the next screen.
4 ) Press [MENU] button to return to the previous screen
sequentially, terminating the operation.
[RETURN]
Set the model name.
Set the serial number.
Set the usage time.
Initialize the system log.
Initialize the temperature log.
Save the system log to the USB flash
drive.
Save or restore the user settings to the
USB flash drive.
Set the display time of the power off
confirmation screen which is displayed
when the main power is turned off.
SERVICE MENU3 1/1
MODEL NAME SETTING
S/N SETTING
USAGE TIME SETTING
SYSTEM LOG INITIALIZE
TEMP LOG INITIALIZE
SAVE LOG
SAVE/RESTORE SETTINGS VALUE =>
POWER OFF COUNT
OK [ENTER]
=>
=>
=>
=>
=>
=>
=>
END [RETURN]