Sharp PN-L803C Service Manual page 14

2 – 8. SUPPLIED COMPONENTS
Liquid Crystal Display Monitor: 1
Remote control unit: 1
Cable clamp (insertion type): 4
* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
2 – 9 SYSTEM REQUIREMENT
To use the touch panel, the touch panel and computer must be connected, and Touch Panel Settings Tool, Touch Pen Utility, and
Pen Software must be installed on the computer from the supplied CD-ROM.
When the Touch Display Downloader is installed, you can check and download the most recent versions of the software programs. To
install the software, see the manual for each.
The USB port varies depending on the terminal connected to the computer.
(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)
Download the setup program for the Touch Viewer with the Touch Display Downloader.
Cable clamp: 3
PN-L803C/80TC3 OUTLINE OF THE PRODUCTS
Power cord: 1
Remote control unit battery (R-6 ("AA" size)): 2
CD-ROM (Utility Disk): 1
CD-ROM (Touch Display Link): 1
Touch Display Link License: 1
Setup Manual: 1
Touch pen (for capacitive touch panel PN-ZL03): 2
Touch pen adapter (PN-ZL03): 1
Pen tip for touch pen (for capacitive touch panel): 4
Touch pen battery (LR-03 ("AAA" size)): 2
Tray: 1
Speaker cover: 2
USB cable: 1
RS-232C conversion cable (3.5mm mini jack): 1
Eraser (for capacitive touch panel): 1
Camera mount: 1
Camera screw (inch thread): 1
Touch pen adapter screw (Step screw, M3): 1
Speaker cover attachment screws (M3)/ Camera mount screws
(M3): 6
Vertical sticker (Logo): 1
ID labels (for touch pen): 4 x 2
Cover Sharp logo: 1
Place this sticker onto the SHARP logo to cover the logo.
1 - 9