Sharp PN-L803C Service Manual page 17

3- 2. REMOTE CONTROL UNIT
No. Function
1 Signal transmitter
2 POWER button
Turns off the volume temporarily.
MUTE
3 Press the MUTE button again to turn the sound back
button
to the previous level.
Pressing
when the menu screen is not displayed.
VOL +/-
buttons
Press
* If you do not press any buttons for about 4
seconds,
4
disappears.
* You can also change the setting by touch action.
Pressing
when the menu screen is not displayed.
BRIGHT
+/-
Press
buttons
* If you do not press any buttons for about 4
seconds, the BRIGHT menu automatically
disappears.
Cursor control ( /
Displays monitor information.
The display changes from INFORMATION1 ->
INFORMATION2 -> clear display, and so on every
time you press this button.
DISPLAY
5 - The display disappears automatically after about 15
button
seconds.
- is displayed during LAN communication.
- If is displayed in red, there is a duplicate IP
address.
Each time you press this button, the color mode
changes in the following order:
MODE
6
button
- sRGB applies to PC input only.
sRGB is international standard of color
Contents
or displays the VOLUME menu
or to adjust the volume of the sound.
the VOLUME menu automatically
or displays the BRIGHT menu
or to adjust the brightness.
/ / ) buttons
PN-L803C/80TC3 OUTLINE OF THE PRODUCTS
representation specified by IEC (International
Electrotechnical Commission). Color conversion is
made in taking account of liquid crystal's
characteristics and represents color tone close to its
original image.
- HIGH ILLUMINANCE is a display with colors suited
to bright locations.
The menu is displayed. Press
input mode, and press
TOUCH menu on the monitor button can change the
input mode.
Input mode
DisplayPort
HDMI1
HDMI2
HDMI3
D-SUB1
INPUT
7
D-SUB2
button
- When the input mode is changed, the touch panel
connection also changes. You can set whether the
side or bottom USB port is used in each input mode.
*1 Select the terminal to be used in HDMI1 of INPUT
SELECT.
*2 Select the terminal to be used in HDMI2 of INPUT
SELECT.
*3 Select the terminal to be used in HDMI3 of INPUT
SELECT.
*4 Select the terminal to be used in D-SUB1 of
INPUT SELECT.
*5 Select the terminal for AUDIO SELECT which is
used for audio input.
MENU Displays and turns off the menu screen.
8
button
ENTER Confirms the setting.
9
button
RETURN Returns to the previous screen.
10
button
SIZE The menu is displayed.
11
button Press or
1 - 12
or to select the
to enter.
Audio
Video
DisplayPort input
terminal
HDMI1 input
terminal*1
HDMI2 input
terminal*2
*5
HDMI3 input
terminal*3
D-sub1 input
terminal*4
D-sub2 input terminal
to select the screen size.