Settings Of Auto-Timeout Conditions - Canon imagePRESS C800 Series Operator's Maintenance Manual

1
Initial Setup > Adjustments/Settings > Management Setting Menu Screen > Settings of Auto-Timeout Conditions
3) Press [Yes].
1 Initial Setup > Adjustments/Settings > Management Setting Menu Screen > Settings of Auto-Timeout Conditions

■ Settings of Auto-Timeout Conditions

The auto-timeout time of the Operator Maintenance mode can be changed.
Assignable values: 0 = Off, 5 mins, 10 mins, 20 mins, 30 mins, 1 hour, 90 mins, 2 hours
1) Press [Operator Maintenance Timeout] on the screen of control settings menu.
F-1-74
-> The screen of the settings of auto-timeout conditions is displayed.
2) Set the time of auto-timeout conditions, and Press [OK].
1-39
F-1-75
F-1-76
1-39